The dispersion effect not only looks cool, but it's
easy to achieve. We show you how to make the subject of your photograph looks
like it's disintegrating. All you'll need is Photoshop CC, a few brushes and a
bit of creativity.
By Somrata Sarkar | on May 03, 2019
The dispersion effect is a great
way to add a bit of drama and flare to your images – and once you understand
the basics, you can get as creative as you want.
You will need to install separate
Disintegration brushes which you can find online for free. We've used this pack
from Brusheezy.
We recommend starting with an
image with a plain background, similar to the one we've used (pictured on
left). If you want to experiment with stock photography, you can try Adobe
Stock free for one month too.
Software needed
Step: 1
Open your image in Photoshop and
duplicate the layer (Alt + J or Command + J on Mac).
Next, hide the new layer by
clicking on the Eye icon.
Step: 2
Select the original layer
and use the Lasso tool to draw around the subject. The selection doesn't have
to be precise, it just needs to include the entire subject.
Step: 3
Right click on the selection and
choose Fill.
Step: 4
Ensure that
"Content-Aware" is selected and click OK.
Step: 5
This should leave you with just
the image background. Deselect the Lasso tool's selection if you still see it.
You can do this by going to the Select Menu at the top and choosing Deselect,
or use the keyboard shortcut Ctrl + D or Command + D on Mac.
Step: 6
Now, select the new layer in the
Layers panel. Then use the Quick Selection tool from the Tools menu on the left
to select the entire subject of your image.
Step: 7
Once you're happy with your
selection, click on Select and Mask, which is at the top. If you're using an
older version of Photoshop, click Refine Edge instead.
Step: 8
Click on the Refine Edge button
on the left. We will use this to mask finer details like wisps of hair.
Step: 9
Select the edge of the hair. If
you can't see the selected area, click on "Show Edge" under View Mode
in the Properties panel.
Step: 10
At the bottom of the Properties
panel, select "Layer Mask" from the Output To drop down. Click OK.
Step: 11
You should see a Layer Mask
applied. Duplicate this layer.
Step: 12
Right click on the copied layer's
Layer Mask and click on "Apply Layer Mask".
Step: 13
You should see that the top layer
is now just your subject, isolated. Rename this layer to 'Dispersion' (which
will help avoid confusion later) and turn off the visibility of the middle
layer by clicking on the Eye icon.
Step: 14
Duplicate the 'Dispersion' layer
and rename it to "Foreground"
Step: 15
With the 'Disperson' layer
selected, go to the Filter option in the top menu bar and choose
"Liquify".
Step: 16
Using the Forward Warp tool
(first option on left), drag out the area of the image you want to see dispersed.
You can increase or decrease the
radius of the brush using the square brackets on your keyboard. Use the left
bracket "[" to decrease the radius and the right bracket
"]" to increase the radius.
The degree of distortion you
apply will form the distance of the dispersion or disintegration in your final
image. In other words, distort it as intensely as you want to see the
"ashes" fly.
Once you're happy, click OK.
Step: 17
That should leave you something
like this.
Next, with your Dispersion layer
selected, hold Alt (or Option for Mac) on your keyboard and click on the
Mask button at the bottom of the Layers panel. This masks or hides
the Dispersion layer.
The Mask button is the
rectangle with a circle within it (highlighted in the next slide).
Step: 18
Select the "Foreground"
layer in the Layers panel and click Mask without holding down Alt (or Option).
You should see that your
Dispersion layer has a black mask, while the Foreground layer has a white mask.
The former is a Hide Mask,
while the latter is a Reveal
Mask.
Step: 19
With your Foreground mask
selected, click on the Brush tool and choose a dispersion brush from the Brush
panel. This is where you can install a brush pack if you haven't already.
Make sure the foreground colour
of the brush is set to black when on the "Foreground" layer as this
is what blocks out (that is "masks") bits of the selected layer.
Start blotting out parts of the image.
Play with the brush size, type
and rotation of the brush so the dispersed bits don't look like a pattern.
Step: 20
You can control the brush
dynamics from the drop down at the top.
This is also where you can rotate
the brush (by clicking the arrow on the circle with the cross-hair, which
represents your brush tip).
Step: 21
Next, we will start building the
dispersion "ashes" by revealing parts of the Liquify distortion we
made earlier. Check that the foreground colour of your brush is set to
white.
Click on the
"Dispersion" layer mask.
Step: 22
Start blotting away with the
Brush tool, again, playing with the size and angle of the brush you use.
Take your time here to get the
effect you want.
Step: 23
You can switch between the
'Dispersion' and 'Foreground' layers to add or reduce the degree of the
effect. Just remember to switch your brush colour according to the layer you're
in and what you want to hide or show.
In the 'Dispersion' layer, use
the white brush to show particles and the black brush to hide particles. In the
'Foreground' layer, use the white brush to hide the edges of your subject and
the black brush to reveal edges.
Step: 24
Once you're satisfied with your
effect, you can clean up bits that don't belong.
Select the Soft Round brush from
the General Brushes palette in the Brush menu.
Step: 25
Mask out any fragments that don't
quite belong. In our example, we'll clean up the model's shoulder.
Step: 26
The next step, though optional,
is sharpening the effect if it looks a little too feathered. To do
this, hold down Ctrl + Shift + Alt + E to merge all visible layers.
This should produce a new layer,
"Layer 2"
Step: 27
Right click on "Layer
2" and then Convert to Smart Object.
Step: 28
From the Filter menu at the top,
choose Sharpen, and then Unsharp Mask.
Step: 29
Play around with the amount based
on how much you want to sharpen your image. By converting the layer to a Smart
Object, you can always come back and change the amount later. We've gone with
85%.
Step: 30
This was our final result.
As you can see, there's tonnes
you can do with this effect. Follow us on Twitter (@digital_arts) and show us what you come
up with!
Note: We
may earn a commission when you buy through links on our site, at no extra cost
to you. This doesn't affect our editorial independence. Learn more.

No comments:
Post a Comment
Please do not add any spam links.